How to hack WPA/WAP2 - WPS networks in Windowws
Posted: Tue Oct 23, 2018 11:19 pm
1] This Hack works on Wpa/Wpa2 – Wps Unlocked Networks only
2] Does not work on all Routers & all encryption's, so cannot hack all the wifi networks Available near you. At least this method can’t.
3] Not all Networks or routers can be hacked using this method
REQUIREMENTS:-
1] Laptop or USB wifi Adapter
2] Windows Operating System
3] Wincap
4] JumStart
5] Dumpper
6] NetFrameWork 4.5
7] Wpa/Wpa2 – WPS Networks Available with at least 8% signal
LINK TO DOWNLOAD:-
https://www.4shared.com/rar/gEjQfNQAca/WinPcap.html
(Note:- install above softwares one by one, even one of the Installation is wrong there will be many problems & errors in next process)
STEPS:-
1] After Downloading and Installing all the Software’s Open Dumper (No need of Installing Dumper, whenever you are interested in hacking, all you need to do is open Dumpper )
2] Select your Network Adapter Now Click on “Scan”, There you can see all the available Wifi Networks
3] Now Move on to the “WPS” Tab
4] Select “All networks”
5] Now click on “Scan”
6] Select a Network That You Want Hack
7] Now Click On Start JumpStart
8] JumpStart Will Automatically Start The Process And Complete The Hack
9] Now The Hack is Completed, You are already connected to the network that you Hacked
10] Click on “Profiles” to see the Details and Passwords of the wifi Networks That You Hacked
11] Select a Network and There you can find the details and passwords of the networks that you hacked
12] There is another method to see the password of the network that you hacked
13] Right click on the Networks and select “Open Network and Sharing Center”
14] Now click on the “Connection: Network Name”
15] Then the Properties of the Connected Network Will Appear, Now select “Wireless Properties”
16] Now move to “Security” tab
17] Mark On “Show Characters” and the Password of the Wifi Network is Shown
This is how a Wifi WPA/WPA2-WPS Network is hacked.
2] Does not work on all Routers & all encryption's, so cannot hack all the wifi networks Available near you. At least this method can’t.
3] Not all Networks or routers can be hacked using this method
REQUIREMENTS:-
1] Laptop or USB wifi Adapter
2] Windows Operating System
3] Wincap
4] JumStart
5] Dumpper
6] NetFrameWork 4.5
7] Wpa/Wpa2 – WPS Networks Available with at least 8% signal
LINK TO DOWNLOAD:-
https://www.4shared.com/rar/gEjQfNQAca/WinPcap.html
(Note:- install above softwares one by one, even one of the Installation is wrong there will be many problems & errors in next process)
STEPS:-
1] After Downloading and Installing all the Software’s Open Dumper (No need of Installing Dumper, whenever you are interested in hacking, all you need to do is open Dumpper )
2] Select your Network Adapter Now Click on “Scan”, There you can see all the available Wifi Networks
3] Now Move on to the “WPS” Tab
4] Select “All networks”
5] Now click on “Scan”
6] Select a Network That You Want Hack
7] Now Click On Start JumpStart
8] JumpStart Will Automatically Start The Process And Complete The Hack
9] Now The Hack is Completed, You are already connected to the network that you Hacked
10] Click on “Profiles” to see the Details and Passwords of the wifi Networks That You Hacked
11] Select a Network and There you can find the details and passwords of the networks that you hacked
12] There is another method to see the password of the network that you hacked
13] Right click on the Networks and select “Open Network and Sharing Center”
14] Now click on the “Connection: Network Name”
15] Then the Properties of the Connected Network Will Appear, Now select “Wireless Properties”
16] Now move to “Security” tab
17] Mark On “Show Characters” and the Password of the Wifi Network is Shown
This is how a Wifi WPA/WPA2-WPS Network is hacked.